StarTrace

Tuesday, 7 February 2012

Drum Separator


 DRUM SEPARATORS






Magnetic Drum Separator imgINTRODUCTION:

Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.
Working of Drum Separator:


After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. The role of the magnetic field, magnetic mineral particles to the magnetic pole movement magnetic agglomeration occurs, and be attracted to the cylinder. (Drum Separator) The polarity of the magnetic poles along the alternating direction of cylinder rotation, and at work be fixed, due to alternating magnetic pole magnetic stirring produced the phenomenon of non-magnetic minerals in the turning off, and eventually the suction surface of the cylinder is a concentrate. Concentrate along the edge of magnetic cylinder to the weakest at the magnetic system, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank, if it is full magnetic magnetic roller, brush roll unloading ore is carried out with . Non-magnetic or weakly magnetic minerals are left with the pulp slurry in the discharge groove, that is tailings.
 Drum Separator Structure:(Drum Separator)
Permanent Magnetic Drum Separator mainly by the cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel. Motor or directly through the reducer Promise speed motor, drive cylinder, magnetic roller and the brush roll for rotational movement. Magnetic system is an open magnetic system, mounted on the cylinder and exposed full magnetic. Magnets with stainless steel bolts installed in the magnetic yoke of the floor, out of cylinder yoke shaft, the shaft has Shui arm fixed. Pulled the magnetic system can be adjusted Shui arm angle adjustment lever can be fixed after appropriate. Tank work area with stainless steel plate, frame and other parts of the tank with ordinary steel welding.

Principle:(Drum Separator)
Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences.Permanent Magnetic Drum Separator It is also used for removing or enriching strongly magnetic content of dry minerals.( Drum Separator)
The most widely used application of drum separators is by deflection separation in which the bulk material is fed onto the top of the drum. This must be spread evenly over the entire width in order to ensure optimum utilisation of the drum. The use of a vibratory feeder is appropriate for feeding the material tangentially onto the drum. This operating procedure ensures minimum wear to the outer drum and guarantees constant-speed application. At normal feed speed of 0.2-0.3 m/sec. using vibratory feeders, the material is spread and distributed quickly over the drum, which rotates at a speed of 0.6-0.8 m/sec. The material is reduced to 1/3 - 1/4 of the feed layer height.
       WEBSITE LINK :http://magneticdrumseparator.com/

Contact us: 
Star Trace Pvt. Ltd.
No: 7, Jeevanandham Street, Red Hills, Chennai - 600 052, India.
Telephone:+(91)-(44)-26418456/ 26419439, 
Mobile:+(91)-9380521576/ 9380521567, Fax:+(91)-(44)-26419439
Email: startraceindia@gmail.com, sales@startraceltd.com, 

Keyword tags:-

Drum Separators,  Drum Separators,  Drum Separators,  Drum Separators, roll separator,  Drum Separators,  Drum Separators india,  Drum Separators chennai, rare earth roll  Drum Separators,  Drum Separators, manufacturer of  Drum Separators, manufacturer of  Drum Separators, Supplier of  Drum Separators, Supplier of  Drum Separators, Exporters of  Drum Separators, Exporters of  Drum Separators,  Drum Separators manufacturers,  Drum Separators Suppliers,  Drum Separators exporters , Drum Separators



Permanent Magnetic Drum Separator


permanent MAGNETIC DRUM SEPARATOR






Magnetic Drum Separator imgINTRODUCTION:

Permanent Magnetic Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.
Working of Permanent Magnetic Drum Separator:


After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. The role of the magnetic field, magnetic mineral particles to the magnetic pole movement magnetic agglomeration occurs, and be attracted to the cylinder. (Permanent Magnetic Drum SeparatorThe polarity of the magnetic poles along the alternating direction of cylinder rotation, and at work be fixed, due to alternating magnetic pole magnetic stirring produced the phenomenon of non-magnetic minerals in the turning off, and eventually the suction surface of the cylinder is a concentrate. Concentrate along the edge of magnetic cylinder to the weakest at the magnetic system, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank, if it is full magnetic magnetic roller, brush roll unloading ore is carried out with . Non-magnetic or weakly magnetic minerals are left with the pulp slurry in the discharge groove, that is tailings.

Permanent Magnetic Drum Separator Structure:(Permanent Magnetic Drum Separator)
Permanent Magnetic Drum Separator mainly by the cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel. Motor or directly through the reducer Promise speed motor, drive cylinder, magnetic roller and the brush roll for rotational movement. Magnetic system is an open magnetic system, mounted on the cylinder and exposed full magnetic. Magnets with stainless steel bolts installed in the magnetic yoke of the floor, out of cylinder yoke shaft, the shaft has Shui arm fixed. Pulled the magnetic system can be adjusted Shui arm angle adjustment lever can be fixed after appropriate. Tank work area with stainless steel plate, frame and other parts of the tank with ordinary steel welding.


Principle:(Permanent Magnetic Drum Separator)
Permanent magnetic Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences.Permanent Magnetic Drum Separator It is also used for removing or enriching strongly magnetic content of dry minerals.(Permanent Magnetic Drum Separator)
The most widely used application of drum separators is by deflection separation in which the bulk material is fed onto the top of the drum. This must be spread evenly over the entire width in order to ensure optimum utilisation of the drum. The use of a vibratory feeder is appropriate for feeding the material tangentially onto the drum. This operating procedure ensures minimum wear to the outer drum and guarantees constant-speed application. At normal feed speed of 0.2-0.3 m/sec. using vibratory feeders, the material is spread and distributed quickly over the drum, which rotates at a speed of 0.6-0.8 m/sec. The material is reduced to 1/3 - 1/4 of the feed layer height.
       WEBSITE LINK :http://magneticdrumseparator.com/

Contact us: 
Star Trace Pvt. Ltd.
No: 7, Jeevanandham Street, Red Hills, Chennai - 600 052, India.
Telephone:+(91)-(44)-26418456/ 26419439, 
Mobile:+(91)-9380521576/ 9380521567, Fax:+(91)-(44)-26419439
Email: startraceindia@gmail.com, sales@startraceltd.com, 


Keyword tags:-

Permanent Magnetic Drum Separators,   Permanent Magnetic Drum Separators, permanent Magnetic Drum Separators,   Permanent Magnetic Drum Separators, roll separator,   Permanent Magnetic Drum Separators,  Permanent Magnetic Drum Separators india,   Permanent Magnetic Drum Separators chennai, rare earth roll   Permanent Magnetic Drum Separators,   Permanent Magnetic Drum Separators, manufacturer of   Permanent Magnetic Drum Separators, manufacturer of   Permanent Magnetic Drum Separators, Supplier of   Permanent Magnetic Drum Separators, Supplier of   Permanent Magnetic Drum Separators, Exporters of   Permanent Magnetic Drum Separators, Exporters of   Permanent Magnetic Drum Separators,   Permanent Magnetic Drum Separators manufacturers,   Permanent Magnetic Drum Separators Suppliers,   Permanent Magnetic Drum Separators exporters ,  Permanent Magnetic Drum Separators


Magnetic Drum Separators


MAGNETIC DRUM SEPARATORS



INTRODUCTION:


Magnetic Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.
Working of Magnetic Drum Separators:


After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. The role of the magnetic field, magnetic mineral particles to the magnetic pole movement magnetic agglomeration occurs, and be attracted to the cylinder. (Magnetic Drum Separators)The polarity of the magnetic poles along the alternating direction of cylinder rotation, and at work be fixed, due to alternating magnetic pole magnetic stirring produced the phenomenon of non-magnetic minerals in the turning off, and eventually the suction surface of the cylinder is a concentrate. Concentrate along the edge of magnetic cylinder to the weakest at the magnetic system, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank, if it is full magnetic magnetic roller, brush roll unloading ore is carried out with . Non-magnetic or weakly magnetic minerals are left with the pulp slurry in the discharge groove, that is tailings.
Permanent Magnetic Drum Separator Structure:(Magnetic Drum Separator)
Permanent Magnetic Drum Separator mainly by the cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel. Motor or directly through the reducer Promise speed motor, drive cylinder, magnetic roller and the brush roll for rotational movement. Magnetic system is an open magnetic system, mounted on the cylinder and exposed full magnetic. Magnets with stainless steel bolts installed in the magnetic yoke of the floor, out of cylinder yoke shaft, the shaft has Shui arm fixed. Pulled the magnetic system can be adjusted Shui arm angle adjustment lever can be fixed after appropriate. Tank work area with stainless steel plate, frame and other parts of the tank with ordinary steel welding.


WEBSITE LINK :http://magneticdrumseparator.com/



Contact us: 
Star Trace Pvt. Ltd.
No: 7, Jeevanandham Street, Red Hills, Chennai - 600 052, India.
Telephone:+(91)-(44)-26418456/ 26419439, 
Mobile:+(91)-9380521576/ 9380521567, Fax:+(91)-(44)-26419439
Email: startraceindia@gmail.com, sales@startraceltd.com, 



Keyword tags:-
Magnetic Drum Separators, Magnetic Drum Separators, Magnetic Drum Separators, Magnetic Drum Separators, roll separator, Magnetic Drum Separators, Magnetic Drum Separators india, Magnetic Drum Separators chennai, rare earth roll Magnetic Drum Separators, Magnetic Drum Separators, manufacturer of Magnetic Drum Separators, manufacturer of Magnetic Drum Separators, Supplier of Magnetic Drum Separators, Supplier of Magnetic Drum Separators, Exporters of Magnetic Drum Separators, Exporters of Magnetic Drum Separators, Magnetic Drum Separators manufacturers, Magnetic Drum Separators Suppliers, Magnetic Drum Separators exporters ,Magnetic Drum Separators


Magnetic Drum Separator


MAGNETIC DRUM SEPARATOR






Magnetic Drum Separator imgINTRODUCTION:

Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.
Working of Magnetic Drum Separator:


After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles into the tank was loose state of a mine. The role of the magnetic field, magnetic mineral particles to the magnetic pole movement magnetic agglomeration occurs, and be attracted to the cylinder. (Magnetic Drum Separator)The polarity of the magnetic poles along the alternating direction of cylinder rotation, and at work be fixed, due to alternating magnetic pole magnetic stirring produced the phenomenon of non-magnetic minerals in the turning off, and eventually the suction surface of the cylinder is a concentrate. Concentrate along the edge of magnetic cylinder to the weakest at the magnetic system, mineral water spray in the unloading effect of flushing water was discharged into the concentrate tank, if it is full magnetic magnetic roller, brush roll unloading ore is carried out with . Non-magnetic or weakly magnetic minerals are left with the pulp slurry in the discharge groove, that is tailings.
Permanent Magnetic Drum Separator Structure:(Magnetic Drum Separator)
Permanent Magnetic Drum Separator mainly by the cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by a 2-3mm stainless steel plate welded into the tube, end caps for the aluminum casting or workpiece, connected with stainless steel screws and barrel. Motor or directly through the reducer Promise speed motor, drive cylinder, magnetic roller and the brush roll for rotational movement. Magnetic system is an open magnetic system, mounted on the cylinder and exposed full magnetic. Magnets with stainless steel bolts installed in the magnetic yoke of the floor, out of cylinder yoke shaft, the shaft has Shui arm fixed. Pulled the magnetic system can be adjusted Shui arm angle adjustment lever can be fixed after appropriate. Tank work area with stainless steel plate, frame and other parts of the tank with ordinary steel welding.

Principle:(Magnetic Drum Separator)
Magnetic Drum Separator are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.
The most widely used application of Magnetic drum separator is by deflection separation in which the bulk material is fed onto the top of the drum. This must be spread evenly over the entire width in order to ensure optimum utilisation of the drum. The use of a vibratory feeder is appropriate for feeding the material tangentially onto the drum. This operating procedure ensures minimum wear to the outer drum and guarantees constant-speed application. At normal feed speed of 0.2-0.3 m/sec. using vibratory feeders, the material is spread and distributed quickly over the drum, which rotates at a speed of 0.6-0.8 m/sec. The material is reduced to 1/3 - 1/4 of the feed layer height.
       WEBSITE LINK :http://magneticdrumseparator.com/

Contact us: 
Star Trace Pvt. Ltd.
No: 7, Jeevanandham Street, Red Hills, Chennai - 600 052, India.
Telephone:+(91)-(44)-26418456/ 26419439, 
Mobile:+(91)-9380521576/ 9380521567, Fax:+(91)-(44)-26419439
Email: startraceindia@gmail.com, sales@startraceltd.com, 


Keyword tags:-
Magnetic Drum Separators, Magnetic Drum Separators, Magnetic Drum Separators, Magnetic Drum Separators, roll separator, Magnetic Drum Separators, Magnetic Drum Separators india, Magnetic Drum Separators chennai, rare earth roll Magnetic Drum Separators, Magnetic Drum Separators, manufacturer of Magnetic Drum Separators, manufacturer of Magnetic Drum Separators, Supplier of Magnetic Drum Separators, Supplier of Magnetic Drum Separators, Exporters of Magnetic Drum Separators, Exporters of Magnetic Drum Separators, Magnetic Drum Separators manufacturers, Magnetic Drum Separators Suppliers, Magnetic Drum Separators exporters ,Magnetic Drum Separators